Home Stainless steel bar 202 410 AISI hot rolled stainless steel flat bar Products


202 410 AISI hot rolled stainless steel flat bar
  • Price:

contact now
  • Product Detail
  • ASTM A276, QQS-763, T304, non-polished finish
  • AKA: stainless strip, stainless bar, stainless rectangle
  • Applications: frame work, braces, supports, plates, marine, food, etc.
  • Workability: Easy to Weld, Moderate Cutting, Forming and Machining.
  • Mechanical Properties: Brinell = 170, Tensile = 85,000 +/-, Yield = 34,000 +/-, Nonmagnetic
  • How is it Measured? Thickness (A) X Width (B) X Length
  • Available Stock Sizes: 2ft, 4ft, 6ft, 8ft, 12ft, or Cut to Size
  • 304/304L, 316/316L, 303, 410, 416, 17-4 and more!
  • True flat bar and sheared & edged available
  • Cold drawn flat bar available in some grades and sizes
  • DFARS or domestic material available in many sizes
  • We will custom saw cut to length
  • Polishing services are available

Other Details:

  • All Stainless Steel Flat Bar is available in lengths of up to 4 meter or can be cut to lenghts of less than 4 meters.
  • All Flat Bar comes in a Hot Rolled Annealed and Pickles finish. It is a 2B Mill type finish.
  • We offer stainless steel flat bar in two finishes, hot rolled annealed and pickled (HRAP) and slit rolled edge (SRE). Hot rolled annealed and pickled finished stainless steel flat bar goes through quite a process. First it is rolled on a hot strip mill (hot rolled).
  • Producing slit rolled edge stainless steel flat bar is particularly a specialist service provided by Midway Metals using our slit rolled edge flat bar machine. The machine flattens, straightens, edges and cuts stainless steel flat bar in any width from 20 to 200mm. The biggest benefits for our customers are that we can now produce stainless steel flat bar faster than ever, and that we can provide lengths from 2-6 metres as the customer requires.
  • Stainless steel flat bar is divided into two primary groups – true flat bar and sheared and edged bar. True flat bar is usually in the HRAP condition, though it may sometimes be cold drawn. This bar has fairly sharp corners and tighter tolerances on thickness and width than sheared and edged, and is often used by fabricators where the finished project is polished. Sheared and edged material is cut from plate, and then put through a process which straightens the bars and cleans up the edges. This is a much more cost effective way to buy a flat bar when corner sharpness and tolerances aren’t critical. The standard lengths of true bar are 12’-14’ random lengths, while sheared and edged bars typically come in 12′ dead lengths.
  • If you don’t see what you’re looking for just call! We specialize in locating hard to find items.

have a question? you can call us or Email us by sending a message below.

Subject : 202 410 AISI hot rolled stainless steel flat bar

service online

Service Online